MACROSOL NPK 12-12-36+TE

MACROSOL NPK 12-12-36+TE

Code registration number: 69072

MACROSOL NPK 12-12-36+TE is a complete and balanced fertilizer. It also contains micronutrients (TE) such as iron, zinc, manganese and copper, which help improve plant growth and quality. Due to its high potassium content, this fertilizer is especially suitable in the final stages of plant growth to increase fruit quality, color, flavor and shelf life.

Macrosol water-soluble powder fertilizer with the formula 12-12-36 is a balanced combination of nitrogen (12%), phosphorus (12%), and a high percentage of potassium (36%), which is specially designed for the periods after flowering to harvest. This product, with its high solubility and chlorine-free formulation, can be used in all irrigation systems and plays a key role in increasing the yield, quality, taste, and shelf life of the final product.

  • Increase fruit size, color, flavor, and sugar content
  • Improve plant resistance to environmental stresses such as salinity, drought, and heat
  • Increase cell wall strength and increase storage life
  • Support metabolic activities and energy transfer in the plant
  • Help proper green growth and support continuous fruiting
  • Prevent leaf yellowing and general plant weakness in the post-flowering stages
  • No salinity or toxicity to the plant
  • Suitable for drip, sprinkler, and flood irrigation
  • Free of heavy impurities and compatible with neutral to slightly acidic pH
  • Can be used alone or as a supplement in combined nutritional programs

Total nitrogen (N):

12.0%

Nitric nitrogen (N-NO3):

3.6%

Ureic nitrogen (N-NH2):

8.4%

Total phosphorus pentoxide (P2O5):

12.0%

Water-soluble phosphorus pentoxide (P2O5):

12.0%

Water-soluble potassium oxide (K2O):

36.0%

Total sulphur trioxide (SO3):

14.7%

Total boron (B), water-soluble, as boric acid:

0.020%

Total copper (Cu), water-soluble, chelated by EDTA:

0.004%

Total iron (Fe), water-soluble:

0.041%

Iron (Fe), chelated by EDTA:

0.027%

Iron (Fe), chelated by EDDHA:

0.014%

Total manganese (Mn), water-soluble, chelated by EDTA:

0.025%

Total molybdenum (Mo), water-soluble, as sodium salt:

0.002%

Total zinc (Zn), water-soluble, chelated by EDTA:

0.015%

Dose according to the crop’s nutrition requirements and agronomic conditions. Typical application rates range from 0.1-1 g/L drip solution for fertigation; 1-3 kg/100L Spray solution for foliar application.

MACROSOL NPK 12-12-36+TE

1. Safety tips for the user:

  • When using, wear gloves, a mask, and protective glasses to prevent direct contact with skin and eyes.
  • In case of contact with skin or eyes, rinse immediately with plenty of water.
  • Avoid direct inhalation of product vapors or particles.
  • Keep out of reach of children and animals.
  • After use, wash your hands and face with soap and water.

 

2. Storage conditions:

  • Store in a dry, cool place away from direct sunlight.
  • Protect from frost and temperatures above 35°C.
  • Close the product lid tightly after each use to prevent contamination and evaporation.

 

3. Precautions for the plant and the environment:

  • Do not use more than the recommended amount, as it may cause leaf burn or disrupt plant growth.
  • Spraying should be done during the cool hours of the day (early morning or evening) and in windless conditions.
  • Perform a compatibility test before mixing with other fertilizers and pesticides.
  • Avoid allowing residual solutions to enter water sources, rivers, and drinking water wells.
  • If the product is spilled on the ground, clean it up with absorbent materials such as soil or sand and prevent it from entering the sewage system.

 

For precautions when mixing with other fertilizers and pesticides, the following points should be noted:

  • Before mixing, perform a compatibility test. Mix a small amount of the product with the intended fertilizer or pesticide in a small container and check that no precipitation, discoloration, or abnormal reaction occurs.
  • Do not mix with high calcium fertilizers (such as calcium nitrate) and compounds containing copper and sulfur. These compounds may cause precipitation and reduce effectiveness.
  • Do not mix with strong alkaline compounds (PH above 8) such as some agricultural pesticides and detergents, as this may cause the breakdown of amino acids and reduce product efficiency.
  • Be careful with mineral oils and petroleum-based compounds. In some cases, they may reduce absorption or stain the leaves.
  • Mixing with systemic insecticides and fungicides is usually safe, but caution should be exercised regarding dosage. It is always recommended to test on a few plants before using on a large area.
  • For liquid fertilizers and humic acids, mixing is usually straightforward, but the order of addition is important. Add water first, then amino acid, and finally other fertilizers to prevent settling.
  • After preparing the solution, use it immediately. Prolonged storage of the solution may cause deterioration of quality and precipitation.

Additional information

Weight 10 kg
Country of manufacture

Uses

, , , ,