Admix fertilizer, micronutrient

Admix

Admix

Code registration number: 71441

Edemix Micro Complex is a complete micronutrient fertilizer to provide microelements to plants. These deficiencies often manifest themselves with symptoms such as yellowing of leaves, poor growth, flower and fruit drop, reduced yield, and reduced product quality. Using Edemix is ​​a professional solution to prevent and treat these deficiencies.

BrandCICLOSE
Tags, , , , , , ,
Categories
FacebookXPinterestLinkedinWhatsappTelegramEmail

Micro Complex EDMIX is a complete and balanced combination of essential micronutrients for plants, produced in powder form and completely soluble in water. All elements in this fertilizer are stabilized with the chelating agent EDTA to have the highest absorption and mobility in the soil and inside the plant.

This professional combination with precise and scientific percentages includes:

4% iron, 2.5% manganese, 4% zinc, 0.5% copper, 1.5% boron and 0.05% molybdenum, which plays a key role in activating enzymes, improving photosynthesis, uniform growth, flowering, fruit formation and plant resistance to stresses.

  • EDTA chelate: All metal elements (Fe, Mn, Zn, Cu) in this compound are stabilized with EDTA chelate to prevent fixation in the soil and allow for more effective absorption through the roots or foliar application.
  • Increase plant growth and performance: Activate plant metabolic pathways, improve macroelement absorption, enhance leaf color, increase flowering, quality and quantity of the crop.
  • Compatible with alkaline and saline soils: Suitable for adverse soil conditions where microelement absorption is limited.
  • Usable at all stages of growth: From germination to flowering and fruiting, an effective supplement at all stages of growth of agricultural, garden and greenhouse plants.
  • Complete and scientific composition: With a balanced and precise formula, it provides all the microelements needed by the plant in appropriate amounts and prevents nutritional deficiencies.
  • High solubility: 100% soluble in water, without sediment or clogging in the irrigation system, suitable for a variety of application methods (irrigation, foliar spraying, soil application).
Iron (Fe) chelated with EDTA 4%
Manganese (Mn) chelated with EDTA 2.5%
Zinc (Zn) chelated with EDTA 4%
Copper (Cu) chelated with EDTA 0.5%
Boron (B) soluble in water 1.5%
Molybdenum (Mo) soluble in water 0.05%

Foliar Aplication: 0.5 to 1 Kg per 1000 liters of water

Fertigation: 1 to 4 Kg per hectare

Admix

1. Safety tips for the user:

  • When using, wear gloves, a mask, and protective glasses to prevent direct contact with skin and eyes.
  • In case of contact with skin or eyes, rinse immediately with plenty of water.
  • Avoid direct inhalation of product vapors or particles.
  • Keep out of reach of children and animals.
  • After use, wash your hands and face with soap and water.

 

2. Storage conditions:

  • Store in a dry, cool place away from direct sunlight.
  • Protect from frost and temperatures above 35°C.
  • Close the product lid tightly after each use to prevent contamination and evaporation.

 

3. Precautions for the plant and the environment:

  • Do not use more than the recommended amount, as it may cause leaf burn or disrupt plant growth.
  • Spraying should be done during the cool hours of the day (early morning or evening) and in windless conditions.
  • Perform a compatibility test before mixing with other fertilizers and pesticides.
  • Avoid allowing residual solutions to enter water sources, rivers, and drinking water wells.
  • If the product is spilled on the ground, clean it up with absorbent materials such as soil or sand and prevent it from entering the sewage system.

 

For precautions when mixing with other fertilizers and pesticides, the following points should be noted:

  • Before mixing, perform a compatibility test. Mix a small amount of the product with the intended fertilizer or pesticide in a small container and check that no precipitation, discoloration, or abnormal reaction occurs.
  • Do not mix with high calcium fertilizers (such as calcium nitrate) and compounds containing copper and sulfur. These compounds may cause precipitation and reduce effectiveness.
  • Do not mix with strong alkaline compounds (PH above 8) such as some agricultural pesticides and detergents, as this may cause the breakdown of amino acids and reduce product efficiency.
  • Be careful with mineral oils and petroleum-based compounds. In some cases, they may reduce absorption or stain the leaves.
  • Mixing with systemic insecticides and fungicides is usually safe, but caution should be exercised regarding dosage. It is always recommended to test on a few plants before using on a large area.
  • For liquid fertilizers and humic acids, mixing is usually straightforward, but the order of addition is important. Add water first, then amino acid, and finally other fertilizers to prevent settling.
  • After preparing the solution, use it immediately. Prolonged storage of the solution may cause deterioration of quality and precipitation.

Additional information

Weight 1 kg
Country of manufacture

Uses

, , , ,

Related products

...

Product has been added to your list.
"" has been added to your cart.View cart